The mesh cloth is made of medium-alkali or alkali-free glass fiber yarn and coated with alkali-resistant polymer emulsion. Mesh products: alkali-resistant GRC fiberglass mesh, alkali-resistant wall mesh and stone mesh, and marble back mesh.
The main uses are widely used in:
1) On wall reinforcement materials (such as fiberglass wall mesh, GRC wallboard, EPS interior and exterior wall insulation boards, gypsum board, etc.).
2) Reinforced cement products (such as Roman columns, flues, etc.).
3) Granite, mosaic mesh, marble back mesh.
4) Waterproofing membrane cloth, asphalt roof waterproofing.
5) The skeleton material of reinforced plastic and rubber products.
6) Fire board.
7) Grinding wheel base cloth.
8) Geogrid for highway pavement.
9) Caulking tape for construction, etc.
Interior wall products:
GRC product reinforced mesh fabric is made of glass fiber woven fabric as the base material and treated with polymer alkali-resistant emulsion. The product has high strength, good alkali resistance, and can resist the rot of alkaline substances. It is a cement concrete product, Ideal reinforcement for GRC wall panels and GRC components.
General Specifications:
1. Mesh size: 8mm × 8mm 10mm × 10mm 12mm × 12mm
2. Width: 60 cm 90 cm 1 meter
3. Weight per square: 125 grams
4. Length per roll: 100 meters or 50 meters
5. Color; white (standard) yellow green or other colors.
6. Packaging: can be packaged according to customer requirements.
7. Special specifications and hardness can be made according to customer requirements.
Fiberglass self-adhesive tape:
Uses: Repair dryboard walls, gypsum board joints, cracks in various walls and other wall damage
Main properties: excellent alkali resistance, durable: high tensile strength and deformation resistance, crack resistance: no deterioration, no foam: excellent self-adhesive,
No need to apply primer in advance, it is quick to use and easy to apply.
Specifications: 8 × 8.9 × 9 mesh / inch: 55-85 grams / square meter.
Width: 25-1 000 mm: Length: 10-153 meters.
Color: Usually white.
Construction method:
1. Keep walls clean and dry.
2. Tape the cracks and press down.
3. Make sure that the gap is covered with tape, then use a knife to cut off the excess tape, and then brush with mortar.
4. Let it air dry, then lightly sand.
5. Fill in enough paint to make the surface smooth.
6. Cut off any leaking tape. Then, taking care that all cracks are properly patched, trim around the patch with a fine composite to make it as smooth as new.
Alkali resistant products:
The mesh cloth is based on medium-alkali or alkali-free glass fiber woven fabric and is treated with alkali-resistant coating. The product has high strength and good alkali resistance, plays an important structural role in the thermal insulation system, and mainly prevents the occurrence of cracks. Due to its excellent resistance to acid, alkali and other chemical substances and its high tensile strength in the warp and weft directions, the stress on the external wall thermal insulation system can be evenly dispersed, and the entire thermal insulation caused by the collision and extrusion of the external impact can be avoided. The deformation of the structure makes the thermal insulation layer have high impact strength, and it is easy to construct and control the quality, and it plays the role of "soft steel bar" in the thermal insulation system.