There are five main points in the installation guide for glass fiber reinforced plastic cable tray:
1. When the height of the bridge is 50 or 100, 6 connection holes should be reserved at each end; when the height is 150 or 200, 12 connection holes should be reserved at each end.
2. Support spacing: The support spacing should be less than or equal to the allowable load and support span of the load curve.
3. Bridge width: In addition to determining the width of the glass fiber reinforced plastic cable bridge according to various data, a certain space must be reserved to ensure that there is a place for adding cables in the future.
4. Separate laying: When there are few power cables and control cables, they can be installed in the same bridge frame, but the power cables and control cables must be separated and laid by partitions in the middle.
5. Cable fixation: When the cable bridge is laid horizontally, the connection between the bridges should be set at 1/4 of the span as much as possible. The fixed intervals of horizontal and vertical cables are different, respectively, 2 meters and 1.5 meters.
