Various types of connection features of FRP grating
1. L-shaped connection: used for medium load and special positioning connection of the bracket.
2. M-type connection: fixed and stable, used for the positioning connection of the grid bracket and the bracket.
3. C-type connection: It is used to connect the sides of two grids without brackets, which is integral.
FRP grating protection
1. In the process of use, washing liquid can be used to clean the surface dust and dirt without other maintenance methods.
2. During operation, direct contact with various open flames and high temperatures such as electric welding, oxyacetylene flame, etc., should be prevented during the repair of steel structures and equipment.
3. In the process of use, prevent the prolongation, collision hazards and paint pollution of various steel materials, steel sharp tools, things, etc. during the repair of the steel structure and the harmonious equipment.
FRP grating equipment
1. Refer to the single grid standard of FRP grid, adjust the trench standard as much as possible, make the edge of the grid cut into a closed door, adhere to the integrity of the cell, and achieve the beautiful and generous equipment function.
2. The fiberglass grating is supported on the concrete foundation to a rare 50mm width, and the space between the grating and the concrete is 3-6mm.
Way equipment
1. The supporting edge of the glass fiber reinforced plastic grid is supported on the steel beam to a rare 40mm width, the equipment space between the grid and the grid is 6mm, and the equipment space between the grid and the concrete column is 10mm.
2. M-type or L-type fire appliances are used to fix the glass fiber reinforced plastic grid and the supporting steel beam. Each grid shall be at least 4 pieces. C-type clamps should be used between the sides of two adjacent non-supporting grids. Double-click to use at least one for every 1.8m long center.
Stair equipment
1. The FRP grille step should be installed in the step structure or on the bracket. The structure or bracket can be made of steel or FRP.
2. The glass fiber reinforced plastic grille steps and the structure open area are 3-6mm, each step is fixed with 8 fixed clamps, and each corner is 2 fixed, or it can be directly fixed on the bracket.