FRP anti-corrosion building material glass fiber reinforced plastic tile products have the advantages of anti-corrosion, aging resistance, impact resistance, high light transmittance, beautiful shape, etc. It is a new high-quality green and environmentally friendly building material in the modern generation. It has the characteristics of continuous molding, infinite extension, light weight and high strength, aging resistance, light transmission, flame retardant, precise size, smooth surface, random coloring, maintenance-free, green and environmental protection, etc. The products are currently widely used in large buildings and modern light steel structures. In daily life buildings such as profiled panels, greenhouses, stadiums, and aquaculture, they are closely related to our lives.
Application range of anti-corrosion glass steel tile:
Products are widely used in large buildings, industrial plants, bazaars, greenhouses, aquaculture, gymnasiums and other places, and can be used as building roofs, wall lighting and partitions.
Points for attention in the installation of anti-corrosion tiles:
After the laying is completed, the location of the anti-corrosion glass fiber reinforced plastic tile is reserved, and the construction is carried out gradually from the cornice to the ridge. The anti-corrosion glass fiber reinforced plastic tile is directly buckled on the side peak of the steel plate.
The pilot hole before the anti-corrosion glass fiber reinforced plastic tile is fixed must be 6-9mm larger than the diameter of the fixing screw for thermal expansion and contraction.
When the anti-corrosion glass fiber reinforced plastic tile and the steel plate are overlapped longitudinally, there must be at least one complete wave overlap, and two waterstops must be attached.
When the anti-corrosion fiberglass tile is fixed, a good flashing gasket must be used to make it between the screw and the anti-corrosion fiberglass tile, so as to be waterproof and dustproof. · After inserting the flashing washer into the screw, use an electric drill to lock it into the purlin to complete the fixing of the anti-corrosion tile.
During the construction of anti-corrosion glass fiber reinforced plastic tiles, it is strictly forbidden to step on the wave crest directly to avoid cracking of the anti-corrosion tiles. A 1200mm x 300 mm {length x width) non-slip thick wooden board must be placed in the horizontal position of the anti-corrosion glass steel tile, and the guide holes and fixing screws of the anti-corrosion tile must be stepped on it.