With the continuous development of the times, many machines and equipment have appeared in our lives for us to use, and they have brought us great help, which is of great help to improve work efficiency. FRP pultrusion machine is also a new type of product. It is a machine used to manufacture FRP products, but sometimes when the FRP pultrusion machine is used, mold clogging may occur, which affects production efficiency. So how to deal with the problem of mold blockage in the FRP pultrusion machine?
1. Reduce the amount of filling to keep the product surface full and even.
2. The number of glass fibers should be appropriate, not too much or too little. As for how much can be roughly calculated based on the cut area of the product.
3. Choose a better internal release agent.
4. The temperature cannot be too low or too high. Determined according to the thickness of the product.