FRP grating can be laid by grinding machine or special equipment for car modification, or it can be laid manually. The two ends of the paper tube of each roll of FRP grille are marked with orange and blue symbols. Before laying, the glue surface should be selected downwards. The above symbolic colors must be at one end, so as to inconvenient construction and avoid mislaying the glue surface. . When laying the FRP grating, it should be kept flat and tight without wrinkles, so that the FRP grating has useful tension. After the paving, it will be rolled again with a clean steel wheel roller.
Operation platform of glass fiber reinforced plastic grille: Many chemical plants have a large number of operating platforms. The operating platform made of glass fiber reinforced plastic grille as paving material is resistant to corrosion, does not require paint, does not require maintenance, and has a long service life. It can be used for 15 to 20 years. year. Light weight, compared with steel, the weight is reduced by three-quarters, so there is no need to use hoisting to set up equipment deployment during installation, and it is more suitable as a control platform to support the deployment of set up equipment. The opening and cutting of the glass fiber reinforced plastic grille is very convenient. The arc cutting saw can be used to easily open the holes to meet the requirements of the installation and deployment of equipment, and it will not cause the mechanical properties of the grille to change due to the opening, let alone Cause the grid to scatter.
To deal with the mobile operating platform, it is more appropriate to use the light glass fiber reinforced plastic grille. In addition, a proper plan to make the glass fiber reinforced plastic grille has the right amount of flexibility can reduce the burden of permanent staff on it and improve the obedience of the work. Therefore, it is the ideal material for creating a platform.
