There are many different specifications for the size of the FRP grating template, but the specifications required by many customers are not the same, and different sizes are required, because the general customers buy FRP gratings are required to be cut, so what should be paid attention to when cutting? Let's learn more about the precautions for cutting the FRP grating template:
1. The choice of cutting machine: the glass fiber reinforced plastic grille can use ceramic disc or gold sand disc cutter to stop cutting. It can also be cut directly by the manufacturer.
2. The choice of the mobile support machine: when cutting with a large cutting machine, it needs to flow well to prevent the grid and the cutting machine from moving. If it is cut by the manufacturer, the factory will pay attention to these problems
3. Safety instructions: Before cutting, the operator should wear protective glasses, masks, gloves and overalls, and stop cutting in an environment with good ventilation and crystal light.
4. How to put the FRP grating: Put the bottom of the grating upwards and cut it, which can reduce the occurrence of debris.
5. To stop the review of the measurement: Before cutting, please consider the width of the saw mark of the knife edge. After cutting, the length and width of the grille after cutting are biased to -6mm~0mm; the circular diameter is biased to -9.5mm~0mm
6. Realize the future solution task: the name of the grille needs to be coated with resin after cutting, and the resin used needs to be higher than the title of the resin used for the grille. For the erosion of external glass fibers.
