FRP grille is a kind of reinforced plate-shaped material. The reinforced material is made of glass fiber, the matrix is unsaturated polyester resin, and then it is made through a series of complicated processing. Therefore, FRP grating can be used in many places because of its excellent corrosion resistance. Such as corrosive floor, trench cover, platform, ship deck, stairs, plank road, etc. Below, we will introduce in detail how to choose the FRP grating.
1. It is necessary to determine what the FRP grating is used for, that is, to clarify the purpose of its use. For example, the manufacturer of the car wash shop buys the grille board to prepare to use the grille board as the carrier board of the car wash, that is, the grille board of the car wash room.
2. After determining the purpose of the FRP grating, it is time to determine the size and specifications of the grating plate used. Through the relevant introduction of the manufacturer, you can have a general understanding of the grille. For example, in a car wash, you can choose a 2.5cm-thick grille or a 3.8cm-thick grille. In electroplating equipment factories, grid plates with a thickness of 2.5 cm are commonly used. In sewage treatment plants and chemical plants, it is often 3.8 cm thick grid plates.
3. After choosing a suitable thickness of FRP grating, calculate the size of the grating during use. Such as in a car wash. The size of a car wash station is mostly 1.220m*2.440m, while the size of the FRP grille is 1.220*3.660, which needs to be cut before it can be put into use.
4. Choose appropriate raw materials to make FRP gratings that meet the requirements. If the gratings used in chemical plants or sewage treatment plants are used, it is necessary to select resins with higher corrosion resistance for production.
