Winter is a more difficult season for engineering. Low temperature and harsh environment have a great impact on outdoor installation, so what should be paid attention to in winter installation of FRP grating?
Temperature matters needing attention in the use of FRP grating:
The glass fiber reinforced plastic grille usually inherits the temperature between -20 degrees and 80 degrees. If it is higher than this range, it will be deformed or affected by use. Therefore, the key to the temperature must be too fine in the application process. Preparation before installation: Due to the limitation of the size of the mold for producing FRP gratings, cutting is an indispensable step before being put into use. The cutting work is relatively simple, and only a simple manual cutting tool or a small electric cutting tool is required for cutting.
Note: When cutting, try to keep the cutting surface consistent with the transverse support surface of the bottom glass fiber reinforced plastic grating, so that the surrounding of the glass fiber reinforced plastic grating is kept closed.
Operation process when installing FRP grating:
1. The FRP gratings are connected to each other with FRP fasteners and connectors of the same material.
2. If there is a high requirement for the sealing of the glass fiber reinforced plastic grating, the corresponding adhesive must be used in conjunction with it.
3. Pay attention to the size of the span and the number of horizontal supports, and the overall stability should be the main focus. The maintenance work is very simple, just simple and regular maintenance is enough, usually some cleaning work