The glass fiber reinforced plastic plate is composed of reinforcing fiber and matrix. The diameter of the fiber (or whisker) is very small, generally less than 10μm, with fewer defects and smaller, and the fracture strain is within 30/1000. It is a brittle material and is easily damaged, fractured and corroded. Compared with the fiber, the strength and modulus of the matrix are much lower, but it can withstand large strains, and is often viscoelastic and elastoplastic, and is a tough material.
According to the length of the fiber, FRP can be divided into short fiber reinforced composite plastic and long fiber (or continuous fiber) reinforced composite plastic. According to fiber properties, it can be divided into high-performance fiber composite materials and engineering composite materials.
Product features of FRP flat panel
1. Anti-ultraviolet (anti-aging)
The surface of the product is sprayed and treated, which can absorb ultraviolet rays in sunlight, reduce the oxidation rate of the material itself, and make the product have better anti-aging performance and increase the service life. At the same time, the UV transmittance is low, which avoids the damage of the sunlight.
2. Flame retardancy
Because it is a metal plate, it has good flame retardancy and can meet the requirements of fire protection and safety production.
3. Impact resistance
The product has high strength and can withstand the impact of hail (strong wind). In the impact strength test, a steel ball with a mass of 1kg is used in the upper middle and upper part of the sample to fall freely at a height of 1.5 meters from the top of the wave crest. The product has no broken or penetrating holes.
4. Anti-static
The surface of the product is treated by electrostatic spraying. After being irradiated by sunlight, it can oxidize and decompose the organic dirt attached to the surface of the product. In addition, its super-hydrophilicity makes the dust easy to be washed by rainwater, which has a self-cleaning effect and no maintenance. cost.
Improve the competitiveness of construction units in the market. In the case of improper width, our company can specially make it according to your steel structure size: single-body, double-body wind and dust suppression net, easy to combine.
5. Lightweight and high strength
The relative density of FRP plates is between 1.5 and 2.0, which is only 1/4 to 1/5 of that of carbon steel, but the tensile strength is close to or even higher than that of carbon steel, and the specific strength is comparable to that of alloy steel. Therefore, the glass fiber reinforced plastic plate has excellent results in aviation, rockets, space vehicles, high-pressure vessels, and other products that need to reduce their own weight.
