Cutting tool: Portable cutting machine
Cutting Style: Different cutting styles produce different losses.
Mounting Accessories:
There should be support around the FRP grating, and there should be a support of at least 40mm. Fasteners should be used in the center of every 900~1800mm. At least 4 fasteners should be used for each grille. support. "M" and "L" fasteners are used for the connection between the grille and the frame. The "C" type fastener is used for the connection between two grids, and the bottom of the joint between the grid and the grid should be supported. Fasteners are sold in sets, a set consisting of fasteners, bolts, nuts and washers. All fasteners are made of stainless steel.
Various fasteners, handles, and screws may be required for the installation of FRP grating. Note that the fasteners for FRP grating installation are all made of stainless steel, and 304 and 316L are optional.