I often encounter customers asking whether it is better to use glass fiber reinforced plastic tiles or color steel tiles. Next, the editor will first analyze everyone's questions.
First, the use and characteristics of FRP tiles
In the production process of FRP tiles, there will be some waste materials. We mainly use the following four recovery methods:
1. Fuel: The resin matrix is combustible and can be used for fuel incineration, but there is non-combustible glass fiber yarn on the margin of the waste, so the incineration rate is not high;
2. Shredding: The FRP tile production line has its own recycling equipment, which can be synchronized with the production, and is easy to process after shredding.
3. Refinery gas: The incineration gas can be obtained after the unsaturated resin is incinerated. Because the resin contains petrochemical materials, combustible gas can be collected after sufficient incineration;
4. Damage: The best plan for mechanical waste treatment now, because there are reinforcing fibers compounded with resin on the edge of the waste, and the damaged fibers can be used as fillers for other large and medium-sized FRP products.
2. Some uses of FRP tiles
1. Animal and plant greenhouse lighting;
2. Roofs of industrial plants and civil buildings, etc.
3. The FRP tile is made of alkali-free glass fiber, polyester resin, anti-aging film and other materials, and is mechanized and continuously formed.
4. The appearance is smooth and flat, the section specification is accurate, and the cutting length is arbitrary.
5. The service life of FRP tiles can reach 10-20 years, and the light transmittance is above 85%;
6. Because of its strong permeability and uniform distribution of fibers, the room is warm and soft, and the transmittance of ultraviolet rays is low.
7. FRP tiles have high strength, good impact resistance, and can be impacted by hail without affecting the normal use of the board;
8. Low thermal conductivity and good thermal insulation effect. Double-layer lighting tiles can be used in alpine areas.
9. With the use of wall lamps, the construction cost of aluminum alloy windows is greatly reduced.