Fiberglass cloth is a fabric woven from glass fibers (see inorganic fibers). It has the properties of insulation, heat insulation, corrosion resistance, non-combustion, high temperature resistance, high strength, etc. It is mainly used as insulation material, glass fiber reinforced plastic reinforcement material, chemical filter cloth, high pressure steam insulation glass cloth material, fireproof products, high elastic transmission belt, construction materials and wall coverings, etc. Glass is brittle, and thicker glass fibers are easy to break when weaving, so the fiber diameter generally used for weaving glass cloth is 3.8 to 15.5 microns. Fiberglass can be made into filament and spun yarn. Filament is made by melting and spinning the raw material at high temperature, which is similar to the spinning of general synthetic fiber filament; short fiber is made by making the melt flow through the nozzle hole, and then blowing and breaking it by compressed air or high-pressure steam. Bundled, twisted and plied into glass staple yarn. The weaving method of glass cloth is the same as that of general cotton fabric. Coated fabrics are usually made of resins, etc., and printed glass cloths can also be made of paints.
Pipeline anti-corrosion insulation cloth (pipe wrapping cloth) Product introduction:
Uses: Mainly used for pipeline anticorrosion and heat preservation.
usage:
①Anti-corrosion: First remove the rust from the pipeline, and coat the outer layer of the pipeline with suitable density fiber cloth and bitumen coating or other products at the same time. Usually two or three layers.
②Insulation: After the anti-corrosion treated pipeline is wrapped with a thermal insulation quilt or thermal insulation pipe, use a fiber cloth of suitable width and density to wrap it around the outside of the thermal insulation layer and then paint it or wrap it directly with asphalt cloth. Features: Anti-corrosion, buried in the ground will not rot, placed in the air will not be weathered, not afraid of water, not afraid of the sun. Due to the different needs of construction units, our factory has developed rubber edge fiber cloth for external thermal insulation materials. This product can be provided with any width and any density according to the requirements of construction. For other specifications, please order.
Product introduction: glass fiber products for industrial use: mainly used for pipeline anticorrosion, heat preservation, flue {exhaust duct}, European style, lightweight wallboard, sandstone murals, glass fiber reinforced plastic products and a series of cement gypsum and other GRC components and heat preservation Panel composite panel movable panel and wall, etc.
usage:
①Anti-corrosion: first remove the rust from the pipeline, and coat the outer layer of the pipeline with suitable density fiber cloth and asphalt coating or other products at the same time. Usually two or three layers.
②Insulation: After the anti-corrosion treated pipeline is wrapped with a thermal insulation quilt or thermal insulation pipe, use a fiber cloth of suitable width and density to wrap it around the outside of the thermal insulation layer and then paint it or wrap it directly with asphalt cloth.
Performance: anti-corrosion, buried in the ground will not rot, placed in the air will not be weathered, not afraid of water, not afraid of the sun.