008615233040141
Search
Fiberglass Roving
video
Fiberglass Roving

Fiberglass Roving

Fibreglass roving is coated with silane-based sizing, compatible with UP, VE resins and is widely used to produce transparent, translucent panels and corrugated sheets.
Send Inquiry
Product Details ofFiberglass Roving

Products Description

Fiberglass roving is coated with silane-based sizing, compatible with UP, VE resins and is widely used to produce transparent, translucent panels and corrugated sheets.

Resin mix is applied to a base film moving at constant speed and flattened to ensure uniform thickness, chopped fiber in specified length is distributed evenly onto the resin matrix( or fiberglass mat impregnated with resin mix), covered with a top film and moved into the curing oven.

58-750(001)


Properties

Low static

Low lay-down

Fast wet-out

Good dispersion

High transparency


Testing Report


Item

Test Strandard

Standard Value

Glass Type

E Glass

Appearance

1. No Contamination
2. allow the case of light yellow
3. allowing a small amount of fuzz, pile loop on the bobbin ends.

Size Type

Silane

tex
Linear Density

GB/T7690.1-2001

Nominal value ±5%


Nominal value ±8%

R2O Content

GB/T1549

≤0.80

≤0.80

Moisture Content%

GB/T9914.1-2001

≤0.10

≤0.10

Loss of Ignition%

GB/T9914.1-2001

1.20±0.20

1.20±0.20

Stiffness mm

GB/T7690.4-2001

150±15

150±15

Spilt %

≥85

≥80

Weight kg

17.5±0.5

≥15

Resin

UPVE

Product Standard

GB/T 18369-2008

Notice

Contact with fiberglass may cause temporary irritation. Wear long-sleeved loose-fitting clothing when handing the material. Gloves and eye protection may be apporopriate in certain operations. Wash with soap and warm water after handing. Use of a disposable mast designed for nuisance.The International Agency for Research on Cancer(IARC) has designated continuous filament fiber glass is not classifiable as to humany carcinogenicity.


Storage

Unless otherwise specified,fiberglass roving should be stored in a dry, cool and moisture-proof area. Room temperature and humidity should always be maintained at 15°C – 35°C, 35% – 65% respectively.

Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

To ensure safety and avoid damage to the product, the pallets should not be stacked more than two layers high. When the pallets are stacked in two layers, care should be taken to correctly and smoothly move the top pallet.


Hot Tags: fiberglass roving, China, suppliers, manufacturers, cheap, low price, made in China, mat roving, colored frp panels, fiberglass self adhesive mesh tape, Composite Sandwich Panel, Frp Flat Sheet, Fiberglass Flat Roof

Previous
No Information

Send Inquiry

(0/10)

clearall